To Next PageTo Next Page
Need help?Do you have a question about the Fronius Symo 15.0-3-M and is the answer not in the manual?
General| Max. efficiency | 98.1% |
|---|---|
| Max. input voltage | 1000 V |
| MPPT voltage range | 200 - 800 V |
| Weight | 34.8 kg |
| Protection rating | IP 66 |
| Max. output current | 21.7 A |
| AC nominal voltage | 400 V |
| AC voltage range | 320 - 480 V |
| Frequency | 50 / 60 Hz |
| THD | < 3% |
| Number of MPP trackers | 2 |
| AC Frequency Range | 50 / 60 Hz |
| Maximum Efficiency | 98.1% |
| Warranty | 5 years |
| AC nominal output | 15000 W |
| Max. apparent AC power | 15 kVA |
| Maximum AC Power | 15000 VA |
| Maximum DC Power | 22500 W |
| Operating Temperature Range | -25 to +60 °C |
| Max. input current | 30 A |
| Max. input current (Idc max) | 30 A |
| Cooling | Forced air cooling |
General safety precautions and warnings for device operation.
Details requirements and restrictions for qualified service personnel.
Explains the physical components and overall design of the inverter.
Defines the intended purpose and restrictions for using the inverter.
Explains the Fronius Solar Net system and its data interface capabilities.
Identifies and describes the controls, ports, and indicators on the Datamanager.
Identifies and explains the function of the inverter's buttons and display elements.
Describes the inverter's display, its modes, and display areas.
Explains how to navigate through the inverter's menu structure.
Details the process of entering, scrolling, and exiting the SETUP menu.
General steps for setting values and confirming entries within the Setup menu.
Details specifications and procedures related to USB stick usage for logging and updates.
Explains the purpose and functionality of the inverter's key lock feature.
Provides step-by-step instructions for activating and deactivating the key lock code.
Explains the function of a USB flash drive for recording inverter data.
Guides the process of updating the inverter software using a USB flash drive.
Details the steps required to access the Basic menu using a code.
Lists and describes the parameters available for setting in the Basic menu.
Explains how the inverter displays faults and errors using status codes.
Describes status codes related to grid issues and their typical behavior and remedies.
