Fronius TransPocket 180 - Page 2

Accessing the setup menu
Changing welding parametersParameters for MMA welding
Parameters for TIG welding
Welding parameters in the level 2 Setup menu
Setup menu
MMA welding
Setup menu
Cel electrodes
Setup menu
TIG
Turn and press the adjusting dial to select
and change parameters.
Comfort Stop sensitivity:
TP150 = OFF / 0,6 - 3,5 V | 1,5 V*
TP180 = OFF / 0,6 - 3,5 V | 1,5 V*
Break voltage: 10 - 45 V | 35 V*
Factory setting
Level 2 Setup menu
Software version
Automatic switch-off : 5 - 60 minutes/OFF*
Fuse: 230 V = 10 A, 13 A, 16 A* /
120 V = 15 A, 16 A, 20 A*
Operating time: hours, minutes, seconds
Welding time: hours, minutes, seconds
Starting current duration: 0.1 - 1.5 seconds | 0.5 seconds*
Anti-Stick: On* / OFF
Start ramp: On* / OFF
Break voltage: 25 - 90 V | 45 V*
Factory setting
Level 2 Setup menu
*Factory setting