MIG/MAG 3 - 400 A
Rod electrode 10 - 400 A
Welding current at
10 min/40 °C (104 °F)
40 % d.c.
2)
400 A
60 % d.c.
2)
360 A
100% d.c.
2)
300 A
Welding voltage range according to standard characteristic
MIG/MAG 14.2 - 34.0 V
Rod electrode 20.4 - 36.0 V
Max. welding voltage -
Open circuit voltage 90 V
Degree of protection IP 23
Type of cooling AF
Insulation class F
EMC emission class A
Marks of conformity CE
Safety symbol S
Dimensions l x w x h 625 x 290 x 705 mm
24.61 x 11.42 x 27.76 in.
Weight 54.2 kg
119.49 lb.
1)
connected to public grid at 230/400 V and 50 Hz
2)
d.c. = Duty cycle
CMT 4000
Advanced MV
Mains voltage 3 x 200-240 V
3 x 380-460 V
Mains voltage tolerance +/- 10 %
Mains frequency 50 / 60 Hz
Mains fuse protection 63/35 A slow-blow
Mains connection
1)
Restrictions possible
Primary continuous current
100% d.c.
2)
-
Primary continuous power 13.0 - 16.0 kVA
Cos phi 0.99
Efficiency -
Welding current range
MIG/MAG 3 - 400 A
Rod electrode 10 - 400 A
Welding current at
10 min/40 °C (104 °F)
40 % d.c.
2)
400 A
202
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044
To Next Page
Loading...
