Need help?Do you have a question about the Fronius TransPocket 2000 and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | TransPocket 2000 |
| Category | Power Supply |
| Language | English |
Welcoming message and overview of the manual's purpose and benefits.
Explains the meaning of "Danger!", "Warning!", "Caution!", "Note!", and "Important!" signal words.
Outlines general safety principles, operator qualifications, and manual adherence.
Defines the machine's specific welding processes and prohibited uses.
Specifies operating requirements for temperature, humidity, and air quality.
Details the duties of the owner and personnel regarding safety and operation.
Lists welding hazards and required protective measures for personnel.
Specifies necessary protective gear, including eye, face, hand, and hearing protection.
Explains health risks from welding fumes and the need for ventilation.
Warns about fire and explosion risks from sparks near flammable materials.
Details risks of electric shock from live parts and improper electrical connections.
Emphasizes grounded workpieces, switching off, and correct wiring.
Addresses causes and consequences of stray currents and proper clamp connection.
Advises on preventing electromagnetic interference and identifying sources.
Highlights risks from moving parts like fans and rotating components.
Warns about injury from welding wire contact and burns from hot workpieces.
Covers risks related to hot coolant discharge and electrical hazards in specific environments.
Details safe handling, protection, and usage of pressurized gas cylinders.
Covers machine stability, room regulations, and transportation guidelines.
Procedures for safe operation, coolant checks, and preventive maintenance.
Emphasizes using original parts and obtaining manufacturer permission for modifications.
Mandates periodic safety inspections and recommends calibration intervals.
Explains CE/CSA markings and user responsibility for factory settings.
Explains the rectifier's electronic operation and power conversion process.
Describes the compact, robust design and portability features.
Illustrates applications for manual electrode and TIG welding processes.
Identifies and describes the function of each control and indicator on the operating panel.
Covers initial safety, intended use, setup regulations, and mains voltage connection.
Step-by-step guide for connecting cables, setting parameters, and starting welding.
Detailed steps for connecting torch, gas, setting parameters, and initiating the arc.
Instructions for entering the setup menu using the current dial.
Guide to adjusting the HOT START value for improved ignition current.
Outlines essential cleaning and safety inspection steps for machine longevity.
Lists key technical parameters like voltage, current, efficiency, and protection class.
Diagnoses causes for no output, including mains, cable, and earth faults.
Addresses issues indicated by malfunction lights and tripped fuses.
Covers problems like heavy spatter, poor earth connections, and incorrect polarity.
Troubleshoots ignition failures, arc breaks, and electrode problems.
Addresses issues like electrode melting and incorrect gas usage in TIG welding.
Diagram showing components and their associated part numbers for the main unit.
Diagram of the carriage with components and part numbers.
To Next Page
