Fronius TransTig 2600 Cel User Manual

(15) Final current controller I
E
... percentage adjustment of the main flow to the final
flow.
Adjustment is only possible in 4-step mode. Lowering takes place via the torch
trigger.
(16) Overtemperature indicator ... lights up if the power source heats up too much
(e.g. due to exceeded duty cycle). Further information can be found in the
chapter "Troubleshooting".
(17) S-sign indicator ... lights up when the monitoring function is active.
26

Fronius TransTig 2600 Cel Specifications

General

Brand	Fronius
Model	TransTig 2600 Cel
Category	Portable Generator
Language	English