Fronius WF 15i - Connecting the Welding Torch; Safety; Connecting MIG;MAG Welding Torches

40
Connecting the welding torch
Safety
WARNING!
Danger from electric current.
This can result in severe personal injury and damage to property.
► Turn the power source mains switch to the "O" position.
► Disconnect the power source from the mains.
► Ensure that the power source remains disconnected from the mains until all work has
been completed.
Connecting MIG/
MAG welding
torches
1
CAUTION!
Danger from electric current due to in-
adequate connections.
This can result in severe personal injury
and damage to property.
► All cables, leads and hosepacks must
be properly connected, undamaged,
correctly insulated and adequately di-
mensioned.
* Only if the coolant connections are
fitted in the wirefeeder and when
using a water-cooled welding torch
3
5
7
8
9
4
6
*
2
1
1