SAFETY PRECAUTIONS - continued
OM 0393SB-A
11
TRANSPORT
1. When driving the tractor and equipment on
the road or highway under 25 mph, at night
or during the day, use flashing amber
warning lights and the Slow Moving
Vehicle ("SMV") identification emblem.
2. Check local traffic codes that may apply to
unit usage on public roads and highways in
your area. The use of flashing amber lights
is acceptable in most localities. However,
some localities may prohibit their use.
3. Always disengage equipment drive prior to
transporting unit.
STORAGE
Before storing the snowblower, certain
precautions should be taken to protect it
from deterioration.
1. Clean the snowblower thoroughly.
2. Make all the necessary repairs.
3. Replace all safety signs that are damaged,
lost, or otherwise become illegible. If a part
to be replaced has a sign on it, obtain a
new safety sign from your dealer and
install it in the same place as on the
removed part.
4. Repaint all parts from which paint has
worn or peeled.
5. Lubricate the snowblower as instructed
under "Lubrication" section.
6. When the snowblower is dry, oil all moving
parts. Apply oil liberally to all surfaces to
protect against rust.
7. Store in a dry place.
.
To Next Page
Loading...
