Frontier SB2164 User Manual

SPECIFICATIONS
OM 0393SB-A
3
Working Width 64" 76"
Transport Width 70" 88"
Working Height 27" 27"
Length 39" 39"
Single/Dual Auger Single Single
Auger Diameter 15" 15"
Auger Flighting Thickness 5/16" 5/16"
Impeller Diameter 24" 24"
Impeller Width 7" 8 1/2"
Impeller Shaft Diameter 1 1/4" 1 1/4"
Number of Impeller blades 4 4
Impeller RPM 680 580
Auger RPM 200 185
Skid Shoe Adjustable 6 positions Adjustable 6 positions
Skid Shoe Material High carbon steel High carbon steel
End Plate Thickness 3/16" 3/16"
Back Plate Thickness 11ga 11ga
Impeller Housing Thickness 11ga 11ga
Impeller Blade Thickness 1/4" 1/4"
Side Panel Bottom Thickness 1/2" 1/2"
Cutting Edge Replaceable Replaceable
Cutting Edge Dimension 3/8" x 2" 3/8" x 2"
Chute Base Standard Standard
Parking Stand Standard Standard
Loader Compatibility Current JD 300 Series Loader Carriers
Current JD 400 Series Loader
Carriers
Flow / Pressure 12 to 18 gpm @ 2700 psi 18 to 23 gpm @ 3000 psi
Oil Cooler Standard Standard
V.A.C. System Standard Standard
Fan Drive 89 cc/rev. Hydraulic Motor 127 cc/rev. Hydraulic Motor
Auger Drive 293 cc/rev. Hydraulic Motor 409 cc/rev. Hydraulic Motor
Relief Valve Protection Fan, Auger & Rotation Motor Fan, Auger & Rotation Motor
Main Hydraulic Hoses 3/4" 3/4"
Operating Weight (lbs)-hyd. rot. & deflector N/A 760
Shipping Weight (lbs) N/A 1060
Approx. Set-up Time 2 to 3 hours ( including hydraulic pump)
2 to 3 hours ( including hydraulic
pump)
Chute Deflector Adjustment (standard) Manual Manual
Chute Deflector Adjustment (option)
- cylinder (2"x6") including hoses and tips
- cylinder (2"x8") including hoses
and tips
Chute Rotation (standard)
–
hydraulic motor with electro-hydraulic
valve
–
hydraulic motor with electro-
hydraulic valve
Chute
Two-part Two-part
Drift Cutters
Option Option

Frontier SB2164 Specifications

General

Brand	Frontier
Model	SB2164
Category	Snow Blower
Language	English