SAFETY PRECAUTIONS - continued
OM 0393SB-A
6
NOTICE
A safe operator is the best assurance against accidents. All operators, no matter how experienced
they may be, should read this operator's manual and all other related manuals before attempting to
operate the equipment. Please read the following section and pay particular attention to all safety
recommendations contained in this manual and those labeled on the equipment and on the tractor.
THE SNOWBLOWER
Before Operation
1. Read and understand this operator's
manual and the tractor operator's
manual. Know how to operate all
controls and how to stop the unit and
disengage the controls quickly.
2. Never wear loose, torn, or bulky clothing
around the tractor and the snowblower. It
may catch on moving parts or controls,
causing injury.
3. Before and during the snow season,
thoroughly inspect the area where the
equipment is to be used and remove all
objects that may be thrown or cause
damage to the equipment.
4. Set transmission to neutral and
disengage clutch, if equipped, before
starting the engine.
5. Do not operate equipment in wintertime
without wearing adequate winter
garments and protective clothing.
6. Never attempt to make any adjustments
while engine is running. Read this
manual carefully to acquaint yourself
with the equipment as well as the tractor
operator's manual. Working with
unfamiliar equipment can lead to
accidents. Be thoroughly familiar with the
controls and proper use of the
equipment.
7. Keep all safety guards in place and
verify hardware for proper tightening.
8. Check for moving parts excessive wear
regularly. Replace worn parts with
genuine parts.
9. Replace all missing, illegible, or
damaged safety and warning decals.
See list of decals in operator's manual.
10. Keep safety decals clean of dirt and
grime.
11. Do not modify or alter this equipment or
any of its components or any equipment
function without first consulting your
dealer.
12. The use of rear counterweights is
recommended. Weights provide the
necessary balance to improve stability,
traction and steering. Use only those
recommended by your dealer. Please
refer to tractor's operator's manual for
proper ballasting information.
To Next Page
Loading...
Need help?
General
