FrontLine ST10HT User Manual

WORK SURFACE
WORK SURFACE
* DO NOT WORK *
ABOVE ANCHOR POINT
(ANCHOR POINT)
MINIMUM CLEARANCE 3ft (1m)
DECK/FLOOR/GROUND LEVEL
WARNING!!! SWING FALLS MAY OCCUR WHEN THE WORKER IS NOT DIRECTLY UNDER ANCHOR POINT.
*The user shall be equipped with a means of
limiting the maximum dynamic forces exerted on
the user during the arrest of a fall to a maximum
of 8kN (1800-lbf). In the EU these forces must be
limited to 6 kN (1350-lbf).

FrontLine ST10HT Specifications

General

Brand	FrontLine
Model	ST10HT
Category	Safety Equipment
Language	English