2. Log into the Webmin interface by entering:
Username: dealer
Password: The password is the serial number of the DRS5000 as shown on a label on the top of the unit
3. Then select Sign in
4. Once logged in you will see this screen:
TIP: If you have access to the network at the installation site, you can skip to section 7 and set up the network-
ing first, then disconnect your computer, plug the DRS5000 into the network, join the network from your com-
puter (wirelessly or wired) and return to set up system time, TimeSync, and DRS Recovery.
3
To Next Page
Loading...
General