Electric Fryers
3-3
RE14, RE17, RE22 Electric Fryers
On May 1, 2006 the RE-series
fryer was introduced. This fryer
has rotating elements as well as a
tightly sealed tilt housing.
The heating components in these
fryers: elements, contactors, etc.,
are identical to those in more
feature-laden fryers like LOV
and FilterQuicks. Problems in the
heating circuits troubleshoot the
same in all fryer platforms.
The three-phase wiring, enclosed in a conduit and
sheath to meet new UL requirements, enters the
rotating tube through an open end. The probe is
shielded to reduce RF interference. The temp probe
wiring on a replacement element or probe may be wire
tied to the outside of the conduit.
The elements are attached to a horizontal tube, which
rotates on bushings.
RE217 fryer
To Next Page
Loading...
