Frymaster Performance MJ40 - Shutting the Fryer Down; Controller Operation and Programming

3-5
DANGER
Remove all drops of water from the frypot before filling with cooking oil or shortening.
Failure to do so will cause spattering of hot liquid when the oil or shortening is heated to
cooking temperature and may cause injury to nearby personnel.
3.3 Shutting the Fryer Down
For short-term shut down during the workday, place the fryer power switch in the "OFF" position
and put the frypot covers in place (if the fryer is so equipped).
When shutting the fryers down at closing time, place the fryer power switch in the "OFF" position,
place the gas valve in the "OFF" position, and put the frypot covers in place (if the fryer is so
equipped).
3.4 Controller Operation and Programming
Fryers in the Performance Series can be equipped with Computer Magic III.5 (CM III.5) controller,
Digital Controllers, or Thermostat Controllers. Instructions for using each type are included in the
separate Frymaster Fryer Controllers User’s Manual provided with your equipment.