To Next PageTo Next PageWhat to do if Frymaster LOV BIELA14 actuator functions on the wrong vat?
If the Frymaster Fryer actuator is activating the wrong vat, ensure the actuator is plugged into the correct connection (J1 for FV return, J3 for DV return and J6 for FV drain and J7 for DV drain).
What to do if Frymaster LOV BIELA14 Fryer actuator doesn't operate even when proper voltages are present?
If proper voltages are present at the connector and actuator doesn’t operate, reset power to the Frymaster fryer. If it still doesn’t operate replace the actuator.
What to do if Frymaster LOV BIELA14 Fryer actuator is unplugged?
If the actuator is unplugged, ensure the actuator is plugged into the proper connection (J1 for FV return, J3 for DV return and J6 for FV drain and J7 for DV drain).
General| Manufacturer | Frymaster |
|---|---|
| Model | LOV BIELA14 |
| Category | Fryer |
| Type | Electric |
| Voltage | 208-240V |
| Vat Capacity | 14 L |
Important safety instructions for operating the equipment.
Notices regarding usage, warranty, and compliance.
Alerts for hazards like flammable liquids, fire risks, and cleaning.
Details on warranties for fryer components.
Details of the lifetime warranty for the frypot.
Procedure for returning defective in-warranty parts.
Exclusions from warranty coverage, including misuse.
General safety and preparation steps before performing maintenance.
Procedure for replacing the fryer's main computer unit.
Procedure for replacing components within the electrical component box.
Procedure for replacing the high-limit thermostat.
Procedure for replacing the temperature probe.
Procedure for replacing the fryer's heating element.
Procedure for replacing components within the contactor box.
Procedure for removing and installing a new frypot.
Procedures for servicing the built-in filtration system.
Troubleshooting common issues with the filtration system.
Procedure for replacing filter motor, pump, and associated parts.
Procedure for replacing the filter transformer or relay.
Procedures for troubleshooting and servicing the ATO system.
Troubleshooting common issues with the ATO system.
Pin assignments and harness details for the ATO board.
Procedures for replacing ATO board, pump, and transformers.
Procedures for troubleshooting and servicing the MIB.
Steps for manual filtration operations using the MIB board.
Troubleshooting common issues with the MIB board.
Pin assignments and harness details for the MIB board.
Interpreting MIB display codes for diagnostics.
Explanation of characters displayed on the MIB board.
Procedure for replacing the MIB board assembly.
Procedure for resetting the fryer's control power.
Troubleshooting and service procedures for the RTI system.
Tests and measurements for the RTI system using the MIB.
Wiring and plumbing diagrams for the RTI system.
Quick reference for performing RTI system tests.
Procedures for troubleshooting and servicing the AIF system.
Troubleshooting common issues with the AIF system.
Pin assignments and harness details for AIF actuator boards.
Procedure for replacing the AIF board assembly.
Procedure for replacing the linear actuators.
Procedure for replacing the rotary actuators.
Troubleshooting and service for the M3000 computer.
Troubleshooting common issues with the M3000 computer.
Explanation of M3000 display error messages.
List of useful codes and password procedures for M3000.
List of 'Service Required' errors and their explanations.
List of error codes and their explanations for the M3000.
Procedures for entering and using Tech Mode for settings.
Flowchart for diagnosing and clearing M3000 filter errors.
Overview of the M3000 programming menu structure.
Pin assignments and harness details for M3000 boards.
Instructions for loading and updating the fryer's software.
Flowchart for diagnosing data network issues.
Diagnostic chart for the interface board.
Reference chart for probe resistance values.
Wiring diagrams for domestic, CE, CSA, and Australian configurations.
Wiring diagrams for Delta, WYE, and simplified contactor boxes.
List of main wiring harnesses for the fryer.
List of accessory parts for the fryer.
List of parts for doors, side panels, housings, and casters.
List of components for the fryer's drain system.
List of electronic components and wiring parts.
List of contactor boxes and their configurations.
List of heating element assemblies and associated hardware.
List of replacement computer units for the fryer.
List of various wiring harnesses and assemblies.
List of components for the filtration system.
List of frypot assemblies and associated parts.
List of parts for the oil return manifold system.
List of parts for the return valve assemblies.
List of components for the automatic top-off system.
List of components for the RTI system.
List of wiring connectors, pin terminals, and power cords.
List of various fasteners used in the fryer assembly.
