Frymaster 14 Series - User Manual

Questions and Answers

C
Charles McgeeJul 29, 2025
Why does my Frymaster 14 Series not heat?
- C
  craig68Jul 29, 2025
  Your Frymaster Fryer might not be heating due to several reasons: * The drain valve might be open, in which case you should check the status of the MIB and press reset if a letter other than A is displayed. * The main power cord may not be plugged in; verify that both the main power cord and 120V are fully seated in their receptacle, locked into place, and that the circuit breaker is not tripped. * The main switch inside the cabinet next to the fuse might be switched to OFF. Ensure the switch is switched to ON, then switch the computer off and then on again.
R
reeseericAug 3, 2025
What to do if my Frymaster Fryer display shows CHANGE FILTER PAD?
- J
  Jenna GonzalezAug 4, 2025
  The Frymaster Fryer displays 'CHANGE FILTER PAD' when a filter error has occurred, the filter pad is clogged, a 24-hour filter pad change prompt has occurred, or a change filter pad prompt was ignored previously. Change the filter pad and ensure the filter pan has been removed from the fryer for a minimum of TWO minutes, then press 9 (1 YES) following any additional instruction prompts displayed on the computer. Do NOT ignore CHANGE FILTER PAD prompts.
J
Jason RiveraAug 8, 2025
What does it mean when my Frymaster Fryer display shows REMOVE DISCARD?
- M
  Michael RobinsonAug 8, 2025
  The 'REMOVE DISCARD' message on your Frymaster Fryer indicates that, in non-dedicated mode, a product is dropped that has a different setpoint than the current vat temperature. Remove and discard the product. Press and hold the cook button for three seconds under the display with the error to remove the error. Reset the setpoint of the vat before trying to cook product.
N
nperryAug 13, 2025
How to change the temperature scale on my Frymaster Fryer (Fahrenheit or Celsius)?
- J
  joshuaellisonAug 13, 2025
  To toggle between Fahrenheit and Celsius on your Frymaster Fryer, press and hold 3 and 4 simultaneously until a code appears. Enter 1658. The computer displays OFF. Turn the computer on to check the temperature. If the desired scale is not displayed, repeat the process.
S
Sara MartinAug 19, 2025
What should I do if my Frymaster 14 Series Fryer displays CHANGE FILTER PAD three times and displays OFF?
- S
  Scott ClarkAug 19, 2025
  If your Frymaster Fryer displays 'CHANGE FILTER PAD' three times and then displays 'OFF', it means that 'No' was chosen on the previous CHANGE FILTER PAD prompt, or 'Yes' and 'No' were pressed consecutively. Wait 15 minutes until CHANGE FILTER PAD is displayed with flashing lights. Change the filter pad if needed and ensure the pan is removed from cabinet for at least TWO minutes. Then press 9 (1 YES) to clear the message.
K
Kathy PhillipsAug 23, 2025
What to do if there is no display on my Frymaster 14 Series Fryer computer?
- C
  Cynthia ThompsonAug 23, 2025
  If there is no display on your Frymaster Fryer computer: * First, ensure the computer is turned on by pressing the ON/OFF switch. * Second, verify that the computer power cord is plugged in and that the circuit breaker is not tripped.

Summary

LOVTM ELECTRIC WARRANTY STATEMENT

Warranty Provisions and Exclusions

Details Frymaster's limited warranties for fryers and parts, including exclusions.

Chapter 1: Introduction

Safety Information

Outlines safety precautions, including danger, warning, and caution notations used in the manual.

Chapter 2: Installation Instructions

General Installation Requirements

Electrical Grounding and Power Requirements

Covers electrical grounding standards and specific power supply requirements for safe operation.

Chapter 5: Filtration Instructions

Auto Intermittent Filtration (AIF)

Troubleshooting Filtration Errors

Provides solutions for common errors and issues encountered with the filtration system.

Chapter 7: Operator Troubleshooting

Introduction to Troubleshooting

Computer and Heating Problems

Addresses issues related to the computer display, power, and heating functions of the fryer.

Error Messages and Display Problems

Lists common error codes and display messages, with their probable causes and corrective actions.

Filtration Problems

Solves issues related to the filter pump, drain valves, and auto/manual filtration processes.

Auto Top-Off Problems

Frymaster 14 Series Specifications

General

Model	14 Series
Weight	Varies by model
Frypot Material	Stainless Steel
Heating Method	Gas or Electric
Dimensions	Varies by model
Power Supply	Varies by model
Voltage	Varies by model
Power	Varies by model