EasyManua.ls Logo

Frymaster Performance MJ40 - Filter Operation

Frymaster Performance MJ40
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-6
4. Replace the Magnesol filter assembly in
the filter pan.
Replace the filter assembly in the filter pan,
ensuring that the fitting on the bottom of the
assembly is securely seated in the port in the
bottom of the pan. Sprinkle one cup of
Magnesol XL filter powder evenly over the
screen.
5. Replace the crumb screen, then push the filter pan back into the fryer, positioning it all the
way to the back of the cabinet.
4.3 Operation of the Filter
DANGER
Draining and filtering of cooking oil or shortening must be accomplished with care to avoid
the possibility of a serious burn caused by careless handling. The oil to be filtered is at or
near 350°F (177°C). Ensure drain handles are in their proper position before operating any
switches or valves. Wear all appropriate safety equipment when draining and filtering
cooking oil or shortening.
DANGER
NEVER attempt to drain cooking oil or shortening from the fryer with the burners lit! Doing
so will cause irreparable damage to the frypot and may cause a flash fire. Doing so will also
void the Frymaster warranty.
1. Turn the fryer power OFF. Drain ONE of
the frypots into the filter pan. If
necessary, use the Fryer's Friend clean-
out rod to clear the drain from inside
the frypot.
Rotate ONE of the drain valve handles to the
left to open a drain valve.

Related product manuals