FS IES3110 Series - Connecting the SFP Ports

IES3110-8TFP-R PoE+
1
2
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONCOLE
Reset
115200,8,N,1
7
EN
1. Connect an Ethernet cable to the RJ45 port of a camera, outdoor AP, computer or other network
device.
2. Connect the other end of the Ethernet cable to the RJ45port of the switch.
Connecting the RJ45 Ports
1. Plug the compatible SFP transceiver into the SFP port.
2. Connect a fiber optic cable to the fiber transceiver. Then connect the other end of the cable to
another fiber device.
Connecting the SFP Ports
IES3110-8TFP-R PoE+
1
2
3 4
5 6
7 8
10/100/1000M
PWR
PoE/Act
Link/Act
SYS
9 10
DC 12V-55V
DC48--55V(PoE)
V1+ V1- V2+ V2-
CONCOLE
Reset
115200,8,N,1