Do you have a question about the FS IES5100-24TF and is the answer not in the manual?
MAC Address Table | 8K |
---|---|
Power Supply | 100-240VAC, 50/60Hz |
Ports | 24x 10/100/1000BASE-T RJ45 |
VLAN | 4K VLAN |
Dimensions (W x D x H) | 440mm x 140mm x 44mm |
Operating Temperature | 0°C to 45°C |
Storage Temperature | -40°C to 70°C |
Operating Humidity | 5% to 95% (non-condensing) |
Storage Humidity | 5% to 95% (non-condensing) |
Layer | Layer 2+ |
Brackets for mounting the switch.
Cable for console port connection.
Screws for securing mounting brackets.
Pads for desk mounting the switch.
Identifies SFP and RJ45 ports on the switch front panel.
10/100/1000BASE-T ports for Ethernet connection.
SFP ports for 100M/1G connections.
RJ45 console port for serial management.
Status indicators for power supply units.
Status indicator for the system's operational state.
Indicators for port connectivity and data activity.
Prerequisites for establishing a serial port connection for management.
Prerequisites for establishing network connections via Ethernet ports.
Steps for placing the switch on a desk surface.
Steps for installing the switch into a standard equipment rack.
Details on connecting power wires to the terminal block for Power 1 and Power 2.
Connecting network devices to the switch's RJ45 Ethernet ports.
Connecting devices to the switch's SFP ports using fiber optic cables.
Steps to configure the switch using its web interface.
Steps to configure the switch using the console port.
Resolving problems with 100M/1G SFP ports.
Troubleshooting failures to connect to the switch remotely.
Diagnosing issues when a port is inactive and its LED is off.
Resolving connectivity or frame transmission errors on RJ45 ports.
Links for software and documentation downloads.
Accessing support, help center, and contact information.
Information about the 5-year limited warranty for the switch.
Guidelines for returning purchased items.
Details regarding compliance with FCC rules and regulations.