FSK Hawk - PARADOX SERIAL INTERFACE

10 | P a g e
PARADOX SERIAL INTERFACE
The Hawk can send alarms received from the serial port of the
Paradox E65, MG5050 and SP6000 alarm panels.
Plug the adapter marked PARADOX into the serial port on the
Paradox alarm panel. Plug the other end into the Hawk serial
port.
Events Sent By the Paradox Alarm Panel
The table below shows the Contact ID codes which will be sent
in response to the messages received from the Paradox
E65/MG5050 and SP6000 alarm panel serial ports.
Note that the Hawk will not send all the events, such as trouble
conditions if it is not factory programmed to do so.
PARADOX
FSK
ALWAYS
SENT
EVENT GROUP NO
SUB-GROUP NO
DESCRIPTION
06 = Non Reportable
Event
Telephone Line
Trouble
Comms Trouble
29 = Arming with User
01 - 32 = User
Number
Close by Keyholder
1-20
30 = Special Arming
03 = Partial Arming
Partial Arming
31 = Disarming with
User
01-32 = User
Number
Open by K/H 1-20
32 = Disarming after
Alarm with user
01-32 = User
Number
Open by K/H 1-20
34 = Special Disarming
N/A
Open by K/H 20
36 = Zone In Alarm
01 to 32 = Zone
Number
Burglary Zone 1-32
YES