FSK Hawk - PIMA SERIAL INTERFACE; IDS SERIAL INTERFACE

12 | P a g e
PARADOX
FSK
ALWAYS
SENT
EVENT GROUP NO
SUB-GROUP NO
DESCRIPTION
07 = Maintenance
Exited Prog Mode
Prog Complete
49 = Low Battery on
Zone
01-32 = Zone
Number
Peripheral Trouble
YES
50 = Low Battery on
Zone Restore
01-32 = Zone
Number
Peripheral Trouble
51 = Zone supervision
trouble
01-32 = Zone
Number
Peripheral Trouble
YES
52 = Zone Supervision
restore
01-32 = Zone
Number
Peripheral Trouble
53 = Wireless Module
Sup Trouble
Peripheral Trouble
54 = Wireless Module
Sup Rest
Peripheral Trouble
55 = Wireless Module
Tamper Trouble
Peripheral Trouble
56 = Wireless Module
Tamper Rest
Peripheral Trouble
PIMA SERIAL INTERFACE
Plug the adapter marked PIMA into the serial port on the Pima
alarm panel. Plug the other end into the Hawk serial port.
The Pima serial interface will send the standard FSK alarm
codes.
IDS SERIAL INTERFACE
Use the serial interface cable along with the adapter board
marked TEXECOM/IDS.
There are no special settings required on the panel