FSK Hawk - Serial Port

6 | P a g e
The alarm panel must be programmed to use its dialler, and
the option for reporting must be set to Contact ID. Refer to
the programming manual of the applicable Alarm Panel.
The default inputs are as follows:
INPUT
FUNCTION
DEFAULT
TRIGGER
1
OPEN/CLOSE
BY KEYHOLDER 1
HIGH = CLOSE
LOW = OPEN
2
PANIC
HIGH
3
DELAYED ALARM
HIGH
4
BURG ZONE 1
HIGH
5
BURG ZONE 2
HIGH
6
MEDICAL
HIGH
7
FIRE
HIGH
The inputs can be factory programmed for your particular
requirements.
Serial Port
The Hawk can receive alarms from the following alarm panels
on its serial port:
 FSK Rhino alarm panels
 Texecom premier range
 Paradox E65, SP6000 and MG5050
 Pima
 IDS