13 | P a g e
SPECIFICATIONS
Transmitter
Radio Performance tested to : ETSI 300-086
EMI Tested to : ETSI EN 301
Safety to : EN 60 950
Mode of Operation : FM
Channel Spacing : 12,5kHz
Power Requirements : 35mA Standby, < 1.6A
Transmitter Active
Frequency of Operation : Lowband 135 to 156MHz
: Highband 155 to 175MHz
Carrier Power : > 8W into 50E
Frequency Error : < 1kHz (0 to 55 °C)
Spurious Conducted Components : < -36 dBm (9kHZ to 1GHz)
< -30 dBm (1GHz to 4GHz)
Adjacent Channel Power : < -60dB
Frequency Deviation : < 2.5kHz (2kHz standard)
Transient Frequency Behaviour : To ETSI 300-086
Electrical
Power Requirements : 13.2V DC Nominal (10 – 15V)
35mA Standby, < 1.6A
Transmitter Active
Low Voltage Alarm : 10.5V
Environmental
To Next Page
Loading...
