FSK TCP 0211 - NETWORK AND PERIPHERAL SETTINGS

12 | P a g e
LIMIT MODE
ALARMS RECEIVED
NONE
All alarms
STRICT
Only panic and Burglary Signals
RECOMMENDED
The recommended list of FSK alarm
codes.
Refer to Appendix B
Limit mode set to NONE is not recommended on older radio networks.
DHCP
The DHCP setting enables or disables DHCP. If DHCP is enabled then the Ethernet
will receive an IP address from the network. If disabled then a static IP must be
entered as per IP address, subnet mask, gateway 1 and gateway 2 settings
described previously on pages 7, 8 and 9.
The following options are available:
DHCP MODE
DHCP ENABLED
ON
DHCP is enabled for the network
OFF
DHCP is not enabled – static IP’s to be used
PRINTER