LCK sclr Video Lock: sclr[A|B|P|M]
LCK sclr? Video Locked Inquiry: sclr[A|B|P|M]
LOADR Loader Mode: Place Graphics Board into Loader Mode
MADB n sclr Motion Adaptive De-interlacing Bypass:
n[0|1] DISABLE|ENABLE sclr[A|B|P|M]
MSTAT sclr FACTORY USE ONLY
OCRECF n Output Configuration Recall: n[0-7]
OFRATE n Output Frame Rate: n[0|1|2] 59.94Hz|50Hz|75Hz
OSYNC n op Output Sync:
n[1-5], -C|+H+V|+H-V|-H+V|-H-V op[B|H|P] BNC|HD15|Preview
OTPM m ty iv bx gr Output Test Pattern: m[0-3], ty[0-4], iv, bx, gr [0|1]
OFF|ON
PFSD n sclr Progressive Frame Seq Det. (3-2 Pulldown):
n[0|1] DIS|ENA sclr[A|B|P|M]
PHCAL FACTORY USE ONLY
PHRST FACTORY USE ONLY
PHSCAL Phase Calibration
PHSET FACTORY USE ONLY
RESET op Reset System: op[A|F] All|Factory Defaults
RTE n c Router Switch Command:
n[1-9] Input Source Sel - 9=BLK c[M|P] Main|Preview
SSTAT FACTORY USE ONLY
STAT? FACTORY USE ONLY
STATS? Print Log File
T nnn T-BAR Transition:
nnn[0 - 255] where 0 = Scaler B, 255 = Scaler A
TBLS n Terminal Backlight Status: n[0|1] OFF|ON
TCM n Terminal Remote Control Mode: n[0|1] FOLSOM/VISTA|FSR
TDI n Front Panel Display Intensity: n[25|50|75|100]
TDL FACTORY USE ONLY
TER nnn Terminal Encoder Rate: n[-100 - 100]
TKC nn Terminal Key Code: n[06 - 7F]
TLSR Terminal LED Status
TRCF n nn Terminal Recall Configuration File:
Input Source n[1-8] File Num nn[1-64]
TRN dst dn n.n n Transition Inputs: dst[A|B|P|M] dn[1-8], n.n[0-5.0]sec
n[0-6]
UL op nn s[8] Upload CFG: op[I|P] Input Cfg|Program Steps nn[0-64] s[8]
VBW n sclr Video Bandwidth: n[0|1] FULL|REDUCED sclr[A|B|P|M]
VER Version Information
VPK n sclr Video Peaking: n[0|1|2|3] MIN|NOM|INC|MAX sclr[A|B|P|M]
VRBOS n Verbose Mode: n[0|1], OFF|ON
Compass S2 Command List/Description
Command: ACFG
Description:
Automatically configure one-to-one sampling input configuration.
Parameters:
sclr – scaler value (A,B,P or M)
Example:
acfg A – automatically configure scaler ‘A’.
Command: ADBG
Description:
Toggles led1 on the audio interface board
36 Compass S
2
To Next Page
Loading...