Fuji Electric FRN0033C2S-2U User Manual

Instruction Manual
Supplement for FRN-C2S-2U/4U (7.5 to 20 HP)
Compact Inverter
Three-phase 200 V series: FRN0025 to 0060C2S-2U
Three-phase 400 V series: FRN0013 to 0030C2S-4U
Thank you for purchasing our FRENIC-Mini series of inverters.
• This manual is a supplement to the FRENIC-Mini Instruction Manual (INR-SI47-1729-E,
INR-SI47-1745-E). It describes the FRENIC-C2S (Inverter types FRN0025 to 0060C2S-2U
and FRN0013 to 0030C2S-4U). For other descriptions, refer to the original manu
al.
• Improper handling might result in incorrect operation, a short life, or even a failure of this
product as well as the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this
product is discarded..
Fuji Electric Co., Ltd. INR-SI47-1833-E
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Fuji Electric FRN0033C2S-2U Specifications

General

Model	FRN0033C2S-2U
Type	Inverter
Rated Output Power	3.3 kW
Frequency	50/60 Hz
Protection Level	IP20
Control Method	V/f Control
Cooling Method	Fan Cooled
Input Voltage	3-Phase 200 to 240VAC
Output Voltage	3-Phase 200 to 240VAC
Frequency Range	0.1 to 400 Hz

Summary

FRENIC-Mini Inverter Manual Overview

Important Safety Precautions

Highlights critical safety warnings regarding product handling and manual distribution to end users.

Inverter Mounting and Wiring Basics

Main Circuit Terminal Arrangement

Details main circuit terminal layout and screw tightening torque specifications for inverter models.

Advanced Wiring and Cable Management

Output Terminal Wiring and Surge Protection

Guides wiring of output terminals and addresses surge voltage concerns for long motor cables.

Inverter Specifications - 200V Class

Output and Input Ratings (200V)

Details output ratings, input ratings, and braking specifications for the 200V class FRENIC-Mini inverters.

Inverter Specifications - 400V Class

Output and Input Ratings (400V)

Details output ratings, input ratings, and braking specifications for the 400V class FRENIC-Mini inverters.

Peripheral Equipment and Safety

Critical Safety Warning for Installation

Warns about using appropriate rated current for peripheral equipment to prevent fire hazards.

IT System Usage and UL/cUL Certification

UL and cUL Certification Requirements

Outlines requirements for using FRENIC-Mini inverters in systems certified to UL and CSA (cUL) standards, including safety precautions.

UL/cUL Certification: Electrical Details

Short Circuit Rating and Fuse Selection

Specifies short circuit ratings and UL certified fuse requirements for inverter installation based on power supply and model.