To Next PageTo Next Page
Need help?Do you have a question about the Fuji Electric FRN0025C2S-2U and is the answer not in the manual?
General| Model | FRN0025C2S-2U |
|---|---|
| Type | Inverter |
| Input Voltage | 200-240V |
| Input Phase | Single-phase |
| Output Voltage | 200-240V |
| Output Phase | Three-phase |
| Horsepower (HP) | 3 |
| Output Current | 11 A |
| Frequency | 50/60 Hz |
| Protection Level | IP20 |
| Cooling Method | Fan cooled |
| Series | FRENIC-Mini |
| Rated Power (kW) | 2.2 kW |
| Control Method | V/F control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat |
Details the terminal layout and screw specifications for main circuit connections.
Provides recommended wire sizes for main circuit terminals under specific conditions.
Explains how to connect main circuit terminals and grounding terminals, including motor wiring.
Lists standard motor parameters and related function codes for inverter setup.
Provides detailed information on specific function codes like F50 and F51.
Details specifications for standard inverter models.
Specifications for the 200V class series of inverters.
Specifications for the 400V class series of inverters.
Provides external dimensions and mounting information for standard models.
Details the external dimensions for standard inverter models.
Lists peripheral equipment like MCCBs and RCDs/ELCBs for inverter installation.
Presents a list of recommended DC reactors (DCRs) for FRENIC-Mini series inverters.
Details compliance with relevant European standards including EMC and Low Voltage Directives.
Covers recommended installation procedures for EMC compliance.
Specifies leakage current values for optional EMC-compliant filters.
Explains points for consideration when using FRENIC-Mini in systems certified by the EU Low Voltage Directive.
Addresses considerations for using FRENIC-Mini in systems certified by UL and CSA standards.
Guidelines on using IEC60364-5-52 wires and circuit protection for compliance.
Instructions on using the inverter with different power supply system configurations.
Guidance on using the inverter with various IT system configurations.
Specifies short circuit rating requirements for UL certified fuses.
Details UL certified fuse installation and recommended wire sizes.
Requirements for transient surge suppression for CSA compliance.
Guidelines for connecting 380-480V models to a TN-C system.
