Fuji Electric POD UG221H-LR4 - Communication Parameter Screen

6
2. Main Menu Screen 6-13
Simple POD Operations
3. Communication Parameter Screen
When the [Comm. Para.] switch on the Main Menu screen is pressed, the “Comm. Param.” screen,
shown below, is displayed.
This screen is used to check the Simple POD communication parameter settings.
Communication parameter setting
Multi-link 2 or multi-link settings
Displayed when [Multi-Link] or [Multi-Link 2] is selected
for [Connection] on the [Comm. Parameter] dialog
The Main Menu screen is displayed again.