Fuji Electric TP-A1 - Page 15

3-2
Table 3.2 Overview of Keypad Functions
Keys Functions
Program key
This key switches the operation modes between Running mode/Alarm mode
and Programming mode.
RESET key
Reset key which works as follows according to the operation modes.
 In Running mode: This key cancels the screen transition.
 In Programming mode: This key resets the alarm states and switches to
Programming mode.
 In Alarm mode: This key discards the settings being configured
and cancels the screen transition.
UP/DOWN/
LEFT/RIGHT
arrow key
/
UP/DOWN key which works as follows according to the operation modes.
 In Running mode: These keys switch to the digital reference
frequency and PID command modification screen
(when commands from the keypad are enabled).
 In Programming mode: These keys display multiple alarms and alarm
history.
 In Alarm mode: These keys select menu items, change data, and
scroll the screen.
/
These keys move the cursor to the digit of data to be modified, shift the
setting item, and switch the screen.
SET key
Set key which works as follows according to the operation modes.
 In Running mode: Pressing this key switches to the selection screen
of the LCD monitor content.
 In Programming mode: Pressing this key switches to the alarm detailed
information screen.
 In Alarm mode: Pressing this key established the selected items
and data being changed.
HELP key
Pressing this key calls up the HELP screen according to the current display
state.
Holding it down for 2 seconds toggles between the remote and local modes.
Run key
(forward)
Pressing this key starts running the motor in the forward rotation (when a run
command from the keypad is enabled).
Run key
(reverse)
Pressing this key starts running the motor in the reverse rotation (when a run
command from the keypad is enabled).
STOP key
Pressing this key stops the motor (when a run command from the keypad is
enabled or the STOP key priority is selected).