Fuji Electric TP-A1 - Chapter 3 OPERATION USING the MULTI-FUNCTION KEYPAD; Names and Functions of Keypad Components

3-1
ENGLISH
Chapter 3 OPERATION USING THE MULTI-FUNCTION KEYPAD
3.1 Names and Functions of Keypad Components
The keypad allows you to run and stop the motor, monitor the running status, specify the function code data,
and monitor I/O signal states, maintenance information, and alarm information.
Figure 3.1 Names and Functions of Keypad Components
1. LED indicators:
These indicators show the current running status of the inverter. Refer to Table 3.1.
2. LCD monitor:
This monitor shows the following various information about the inverter
according to the operation modes.
Refer to Figure 3.2 and
Table 3.3.
3. Keys:
These keys are used to perform various inverter operations. Refer to Table 3.2.
Table 3.1 Indication of LED Indicators
LED Indicators Indication
(Green)
Shows the inverter running state.
Flashing No run command input (Inverter stopped)
ON Run command input
(Yellow)
Shows the light alarm state.
OFF No light alarm has occurred.
Flashing /ON A light alarm has occurred.
(Red)
Shows the alarm state (heavy alarm).
OFF No heavy alarm has occurred.
Flashing A heavy alarm has occurred.
Prog
r
am key
STOP key
Run key (forward)
LED indicators
Run ke
y
(reverse)
RESET key
LCD monito
r
Programming ke
y
s
HELP key
SET keyUP/DOWN/LEFT/RIGHT arrow key