2-4
Figure 2.3 (b) FRENIC-HVAC/AQUA
Connecting the Multi-function Keypad to the Inverter with Remote
Operation Extension Cable or an Off-the-shelf LAN Cable
(4) Be sure to put the front cover back into place before using the inverter.
Using the multi-function keypad remotely in your hand
Follow step (3) in "Mounting the multi-function keypad on the panel" above.
Remote operation
extension cable
(CB-5S, CB-3S, CB-1S)
or LAN cable
RJ-45 connector (modular jack)
Panel
Multi-function
keypad
RJ-45 connector
To Next Page
Loading...