4-1
Chapter 4 SPECIFICATIONS
4.1 General Specifications
Table 4.1 General Specifications
Item Specifications Remarks
Ingress protection IP40: Front side
IP20: Back side
Site location The product must not be exposed to dust, direct
sunlight, corrosive gases, flammable gases, oil mist,
vapor or water drops.
(Pollution degree 2 (IEC/EN 60664-1))
The atmosphere can contain a small amount of salt.
(0.01 mg/cm
2
or less per year)
The product must not be subjected to sudden changes
in temperature that will cause condensation to form.
Ambient temperature -10 to +50C
Ambient humidity 5 to 95% RH (No condensation)
Altitude 1000 m or less
Vibration
3 mm (Amplitude): 2 to less than 9 Hz
10 m/s
2
: 9 to less than 200 Hz
Storage temperature -25 to +70C
Storage humidity 5 to 95% RH (No condensation)
External dimensions Refer to the figures below
Mass 120 g
External dimensions
(Unit: mm)
Back viewFront view
To Next Page
Loading...