-38-
Reference Guide - Main Unit
Unable to send data over the
network.
Specify the server correctly.
Specify the storage location correctly.
When SMB is selected, correctly specify the shared name.
When SMB (UNC Format) is selected, specify the save destination correctly.
The login name is not entered correctly. Check the login name you enter.
The password is not entered correctly. Check the password you enter.
The time set on the machine does not agree with that of Windows, when transmission is
performed to Windows OS.
Synchronize the time settings of the machine and Windows.
On Windows OS, SMB transmission is attempted by users who do not set a password.
Follow the steps below to change the settings of network access.
The root of the DFS name space specified for SMB transmission is comprised of more
than three characters.
Specify a DFS name space with a root comprised of less than four characters.
The access right to the specified storage location is not set correctly. Set the access right
to the specified storage location correctly so that you can read and write the files and
folders.
The SMB port number is blocked. Check the destination server, the router between the
MFD and the server, virus scanning software on the destination server, and firewall soft-
ware to confirm whether the SMB port is blocked or not.
Black-and-white gradation is
not reproduced as desired.
[Black & White] is selected for [Output Color].
Select [Grayscale] for [Output Color].
Symptom Cause/Remedy
(1) Start Windows, and select [Control Panel] > [Administrative Tools] > [Local
Security Policy].
(2) Select [Security Settings] > [Local Policies] > [Security Options].
(3) Change [Account: Limit local account use of blank passwords to console
logon only] to [Disabled].
To Next Page
Loading...
Need help?
General
