Fuji Xerox ApeosPort-V C3320 Administrator's Guide

Trouble during Copying
397
Problem Solving
14
The copy has a
stripe pattern.
The document enlargement
ratio is too large.
Vertical stripes may be printed on the copies
depending on the ratio. Adjust the ratio to
eliminate the stripes.
Refer to "3 Copy" > "Copy" > "Reduce/Enlarge (Making
Enlarged/Reduced Copies)" in the User Guide.
The copy is
misaligned or
skewed.
The document is not loaded
correctly.
Load the document correctly.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document guides on the
document feeder are not set
in the correct positions.
Load the document correctly, and align the
document guides to the document.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The paper tray is not inserted
correctly.
Firmly push in the tray until it stops to set it
properly.
Refer to "Loading Paper" (P.43).
The paper guides in Tray 5
are not set in the correct
positions.
Load the paper correctly, and align the paper
guides to the paper edges.
Refer to "Loading Paper in Tray 5 (Bypass Tray)" (P.45).
Unable to copy in
color.
[Output Color] is set to [Black
& White].
Set [Output Color] to [Auto Detect] or [Color].
Refer to "3 Copy" > "Copy" > "Output Color (Selecting
the Color for Copying)" in the User Guide.
The document
edges are missing
on the copy.
The document is larger than
the printable area.
Adjust [Reduce/Enlarge] to copy the
document smaller.
Symptom Cause Remedy

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English