EasyManuals Logo

Fuji Xerox ApeosPort-V C3320 Administrator's Guide

Fuji Xerox ApeosPort-V C3320
633 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #520 background imageLoading...
Page #520 background image
15 Appendix
520
Appendix
15
Specifications
This section lists the main specifications of the machine. Note that the specifications and
the appearance of the product may change without prior notice.
îš„ Basic Specifications / Copy Function
Type Desktop
Memory 4 GB (Max. 4 GB)
HDD 160 GB or more (Used space: 128 GB)
Important • Not all the HDD space described above can be used.
Color Capability Full color
Scanning Resolution 600 x 400 dpi
Printing Resolution 1200 x 2400 dpi (photo*), 600 x 600 dpi (text/text-photo/photo/map)
*: When [Photo Image Quality] is set to [High Quality]
Halftone 256 halftones for each color (16.7 million colors)
Warm-up Time 35 seconds or less (at 23 °C room temperature)
When the main power is switched on: 20 seconds or less (at 23 °C room
temperature)
Original Paper Size Legal for both Sheet and Book
Output Paper Size Maximum: Legal (For Trays 1, 2, and 5)
Minimum: 3 x 5" (76 x 127 mm)
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or less; left
and right edges, 4 mm or less
Output Paper Weight 60 - 216 gsm (For Trays 1, 2, and 5)
Important • Use paper recommended by Fuji Xerox. Copying may not be
performed correctly depending on the conditions.
First Copy Output Time <When the document glass is used>
For A4/monochrome priority mode (the default for the [Output Color] is
[Black & White] or [No Default])
Monochrome: 8.6 seconds
Color: 10.0 seconds
For A4/color priority mode (the default for the [Output Color] is [Color],
[Auto Detect], [Dual Color] or [Single Color])
Monochrome: 8.6 seconds
Color: 10.0 seconds
<When the document feeder is used>
For A4/monochrome priority mode (the default for the [Output Color] is
[Black & White] or [No Default])
Monochrome: 9.5 seconds
Color: 12.0 seconds
For A4/color priority mode (the default for the [Output Color] is [Color],
[Auto Detect], [Dual Color] or [Single Color])
Monochrome: 9.5 seconds
Color: 12.0 seconds
Reduction/Enlargement Size-to-Size: 1:1 ± 2%
Preset %: 50%, 70%, 81%, 86%, 115%, 122%, 141%, 200%
Variable %: 25%-400% (1% increments)

Table of Contents

Other manuals for Fuji Xerox ApeosPort-V C3320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-V C3320 and is the answer not in the manual?

Fuji Xerox ApeosPort-V C3320 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-V C3320
CategoryAll in One Printer
LanguageEnglish

Related product manuals