Fuji Xerox ApeosPort-V C3320 Administrator's Guide

Trouble during Faxing
403
Problem Solving
14
The one-page
document is
received split into
multiple pages.
When scanned on the
sender's machine, the
document was enlarged for
some reason.
You can set the machine to process such a
document by using the Auto Reduce on
Receipt feature and a border limit value for
page splitting. According to the setting
combination specified, the received
document is printed as follows:
Refer to "Border Limit" (P.210), or "Auto Reduce On
Receipt" (P.210).
Although the
Folder Selector
feature is set,
however, the
received
document is
printed, and
cannot be stored
in the folder.
An unregistered folder is
specified on the Folder
Selector feature.
When using the Folder Selector feature,
specify a registered folder. If an unregistered
folder is selected, the received document
cannot be stored in the folder, and will be
automatically printed.
For information on how to register the folder, refer to
"Create Folder" (P.236). For information on the setting
of the Folder Selector, refer to "Fax Received Options"
(P.213).
Symptom Cause Remedy
Auto Reduce
on Receipt
ON
Auto Reduce
on Receipt
OFF
Within
border limit
Automatically
reduces image
size and prints
it on one page.
Trims the
portion
exceeding
standard
size and
then prints.
Exceeding
border limit
Splits data at
equal ratio
and prints.
-

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English