14 Problem Solving
492
Problem Solving
14
033-544
[Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
033-545
[Cause] There was no response from the fax recipient.
[Remedy] Confirm that you specified the correct number, and execute the operation again. If the
same message is displayed again, the recipient may not support fax, or the recipient
machine may be powered off. Ask the recipient for details.
033-546
[Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547
[Cause] Communication was terminated by a cause such as pressing the <Stop> button.
[Remedy] No measure is required.
033-548
[Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549
[Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550
[Cause] Cannot execute another job because fax communication is in progress.
[Remedy] Wait until the job being communicated completes, and then execute the operation
again.
033-551
[Cause] You attempted to change a job immediately before fax or telephone communication
completed.
[Remedy] Wait for a while, and execute the operation again.
033-552
[Cause] The total quantity of error lines detected with G3 exceeded the set value.
[Remedy] Confirm the model of the other machine, and execute the operation again. If receiving,
ask the sender to send again.
033-553
[Cause] This machine does not have confidential or relay function. The F-code sent from the
other machine contains an instruction for a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-code.
033-554
[Cause] The password was omitted or did not match in fax communication.
[Remedy] No measure is required.
033-555
[Cause] The password received from the other machine did not match the password for
receiving faxes on the machine.
[Remedy] Check whether the sender specified an incorrect machine password.
033-556
[Cause] The password sent to the other machine did not match the password for receiving faxes
on the other machine.
[Remedy] If necessary, check whether the correct machine password has been instructed to the
other machine.
033-557
[Cause] The number of services or of recipients exceeds the maximum limit.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
recipients, and then send again.
033-558
[Cause] The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
remote ID is not sent.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
