Fuji Xerox ApeosPort-V C3320 Administrator's Guide

Error Code
499
Problem Solving
14
116-310
116-311
116-312
116-313
116-314
116-315
116-316
116-317
116-318
116-319
116-321
116-322
116-323
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-324
[Cause] An error occurred in the machine.
[Remedy] If an error occurred while printing, turn off the machine once, then turn the machine on
holding down both the <Start> and <Stop> buttons simultaneously for six seconds. This
deletes the print data that caused the error. If the error was caused by another reason,
switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
116-325
116-328
116-329
116-330
116-331
116-333
116-334
116-336
116-337
116-338
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-340
116-341
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
116-342
[Cause] An error occurred.
[Remedy] Contact our Customer Support Center.
Error Code Cause and Remedy

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English