Fuji Xerox ApeosPort-V C3320 Administrator's Guide

15 Appendix
534
Appendix
15
Document size 1 Sets the client-created document size.
[99] (Default) : Paper
[100] : Continuous form paper (10 x 12)
[101] : Continuous form paper (10 x 11)
[102] : Continuous form paper (15 x 12)
[103] : Continuous form paper (15 x 11)
[4] : A4
[5] : A5
[15] : B5
[21] : 8.5 x 14
[22] : 8.5 x 13
[23] : 8.5 x 11
[0] : Postcard
The number of characters printed is: 80 characters/72 rows for continuous
form paper (10 x 12), 80 characters/66 rows for continuous form paper (10 x
11), 136 characters/72 rows for continuous form paper (15 x 12), and 136
characters/66 rows for continuous form paper (15 x 11).
Note • When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
• When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the
machine automatically calculates the magnification based on a
combination of [Original Size] and [Paper Size]. If the ratio, however, is
outside the range of 45-210%, the document will not be reduced/
enlarged, and will be printed at a scale of 100%. When [2 Up] is selected,
the machine automatically calculates the magnification based on a
combination of [Original Size] and 1/2 of [Paper Size].
• The orientation set here is that of the document. It is not affected by the
orientation of paper loaded in the paper trays.
Orientation 19 Sets the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
Paper size 2 Sets the size of paper to be printed. This setting can be made only when
[Paper Tray] is set to [Auto] or [Tray 5]. This setting can be configured only for
cut sheets.
[4] : A4
[5] : A5
[15] : B5
[21] : 8.5 x 14
[22] : 8.5 x 13
[23] : 8.5 x 11
[0] : Postcard
Important • If [Paper Tray] is set to Tray 1 or 2, [Paper Size] cannot be set.
Note • When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the
machine automatically calculates the magnification based on a
combination of [Original Size] and [Paper Size]. If the magnification,
however, is outside the range of 45-210%, the document will not be
reduced/enlarged, and will be printed at a scale of 100%.
When [2 Up] is selected, the machine automatically calculates the
magnification based on a combination of [Original Size] and 1/2 of [Paper
Size].
Setting Item
Item
Number
Value

Fuji Xerox ApeosPort-V C3320 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3320
Category	All in One Printer
Language	English