Fuji Xerox ApeosPort-V C3320

Copy
103
Copy
3
2 Select [Source Color].
3 Select [Other than Black] or [Color].
 Other than Black
The colors other than black will be the source
colors.
 Color
Allows you to select one or more source colors
from six preset options.
[Target Area Color] Screen
This screen allows you to select the target color to be used in place of the source colors
specified in [Source Color]. You can select one color from seven preset and six custom
options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1 Select [Dual Color].
2 Select [Target Area Color].
3 Select any color.