Registering/Deleting/Renaming Stored Programs
345
Stored Programming
8
1 Select [Enter/Change Name].
2 Select the number to register or change a name.
Note •Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.77).
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the number to assign or change an icon.
Note •Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.77).
3 Select an icon, and select [Save].
No Icon
No icon is assigned to a registered stored
program.
Icon
Select an icon according to the content of the
registered stored program.
To Next Page
Loading...
Need help?
General
