Fuji Xerox DocuCentre-IV C3373 Administration Guide

3 Maintenance
100
Maintenance
3
Printing a Report/List
You can print a report/list to check the settings and communication status.
This section describes how to print a report/ list.
For information on the types of report/list, refer to "Print Reports" (P.106).
Note • When the <Data> indicator is not lit, you cannot print the Stored Documents List.
1 Press the <Machine Status> button.
2 Select [Print Reports].
Note • If [Print Reports Button] under [Reports] is set
to [Disabled], the [Print Reports] button
appears only when the [Tools] button is
displayed on the [Services Home] screen. For
more information on [Reports], refer to
"Reports" (P.158).
• If you want to print [Billing Data List] or
[Auditron Report (Fax Jobs)], insert a card to
the machine before instructing print.
3 Select the service that you want a report or list
for.
4 Select a report or list to print, and then press the <Start> button.
Note • The reports and the lists to be displayed on the screen depend on the configuration of your
machine.
<Machine Status> button

Fuji Xerox DocuCentre-IV C3373 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Hard Disk Drive	160 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Speed	Up to 33 ppm (color/black)