EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-IV C3373

Fuji Xerox DocuCentre-IV C3373 Administration Guide

Fuji Xerox DocuCentre-IV C3373
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #433 background imageLoading...
Page #433 background image
Configuration for IC Card Reader (Optional)
433
Authentication and Accounting Features
14
3 Select [Tools] on the [Services Home] screen.
4 Select [Authentication/Security Settings].
5 Select [Authentication].
6 Select [User Details Setup].
7 Select [Smart Card Logout Timing], and then select [Change Settings].
8 Select the authentication logout method, and then select [Save].
9 Select [Close].
Step 3 Registering Smart Card Information
The system administrator can register smart cards using CentreWare Internet Services.
Note • The information used for authentication can also be set from CentreWare Internet Services. For
more information, refer to the help of CentreWare Internet Services.
Important •To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.
1 Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.312).
2 Click the [Properties] tab.
3 Click [ ] on the left of [Securities], and then click [Smart Card Settings].
4 Select the smart card to use.
1) Click [Edit] next to the smart card.
2) Select the [Enabled] check box, and then set the priority.
3) Click [Apply].
Note • You can select multiple smart cards, but the card detection time increases in proportion to the
number of cards selected. We recommend that you select the required cards only.
5 Register the smart card that you selected the [Enabled] check box for.
1) Click [Edit] next to the smart card.
2) Configure required settings.
3) Click [Apply].
6 To encrypt the smart card information, click the [Encrypt] button in [Encryption Settings].
Important •Once you encrypt the smart card information, you cannot view or edit the information later. Also,
when you click the [Decrypt] button, the information is reset to the default. You should backup the
smart card information before encryption.
You can backup the smart card setting using [Cloning]. For more information, refer to the help of CentreWare Internet
Services.
Important •To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C3373

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-IV C3373 and is the answer not in the manual?

Fuji Xerox DocuCentre-IV C3373 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-IV C3373
CategoryAll in One Printer
LanguageEnglish

Related product manuals