5 Tools
154
Tools
5
If you frequently use non-standard size paper for copying, assigning the paper sizes to the
buttons will save your time to specify the size each time. For your convenience, set the
commonly used paper sizes in the upper level.
îš„ A/B Series Size
You can select from sizes of A and B series.
îš„ Inch Size
You can select from sizes of inch series.
îš„ Others
You can select from other sizes.
îš„ Custom Size
You can enter any size. Set the X width between 98 and 483 mm, and the Y length between
89 and 320 mm in 1 mm increments.
Note • For envelopes, enter the size with the flap size excluded.
Auto Tray Switching Control
Set the alternative tray or paper when running out of paper loaded in the tray selected.
îš„ Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Select], or [Enable for Same Paper
Type/Color].
When [Enable during Auto Select] is selected, the machine switches the tray when [Auto
Select] is selected in the [Copy] screen or [Paper Select] of the print driver.
Note • The machine does not switch the tray automatically in the following cases:
- Tray 5 is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is selected.
îš„ Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Type Priority]. When selecting [Selected Paper Type Only], you can
specify the paper type.
îš„ Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Image Quality
You can specify the image quality processing method for each of bond paper, plain paper,
recycled paper, plain reload paper, heavyweight paper, heavyweight reload paper, extra
heavyweight paper, extra heavyweight reload paper, and custom paper 1 to 5.
When copying or printing a document, the machine controls the image quality according to
the type of paper set in [Image Quality] and the image quality processing method specified
for that type of paper.
The following table shows available settings.
For information about paper characteristics and notes, refer to "Loadable Quantity and Weight for Supported Paper" (P.38).
Setting values Meaning
Plain A (60-105 gsm) Default setting for bond paper. The image quality is suitable for
color printing. Paper having ream weight of 80 - 105 gsm.
To Next Page
Loading...
Need help?
General
