Configuration for Account Administration
435
Authentication and Accounting Features
14
5 Select [Create/View User Accounts].
6 Select [<Available>], and then select [Create/Delete].
7 Enter a User ID and select [Save].
8 Select [Service Access].
9 Configure the [Account Limit] and [Feature Access] settings for each service, and then
select [Save].
For more information, refer to "Service Access" (P.287).
10 If necessary, select a user role and an authorization group for the user under [User Role],
and then select [Save].
Note • [User Role] is displayed only when [Login Type] is set to [Login to Local Accounts].
For more information, refer to "User Role" (P.288).
11 Select [Close] repeatedly until the [Tools] screen is displayed.
12 Select [Close].
To Next Page
Loading...
Need help?
General
