Fuji Xerox DocuCentre-IV C3373 Administration Guide

Network-related Problems
473
Problem Solving
15
When you cannot print
When you cannot delete documents from the [Print] window
Others
Cause Check point Remedy
The machine is processing a
print job from a different
computer.
(When [SMB (Spool)] is set to
[Off])
Confirm whether the machine
is processing a print job. (A
write error dialog is displayed
to indicate that there is no
room to store your print job.)
Wait until the machine
completes processing the print
job, or change the machine
setting to [Spool] mode.
The connections to the
machine exceeded the
maximum number allowed.
Confirm whether the machine
is processing simultaneous
requests (print requests, status
queries, etc.) from multiple
computers. (A write error dialog
is displayed to indicate that no
more remote computers can be
connected.)
Wait for a while and try
printing again.
Cause Check point Remedy
You are trying to delete all
print data displayed in the
[Print] window. (Only the
system administrator is
allowed to delete all data.)
Confirm whether you are trying
to delete the print data from
the [Print] menu. ([Cancel All
Documents] menu.)
Select the print data to delete,
and delete from the
[Document] menu in the [Print]
window. (Select [Cancel].)
The print data has a different
owner.
Confirm whether the name
displayed as the owner for the
selected print data and the
user's login name to Windows
are the same.
Login to Windows using the
name displayed as the owner
of the print data, and then
delete the print data.
Symptom Remedy
The message "Unknown
document name" is displayed
for the job name in the job
history instead of the correct
job name.
Change the setting of the SMB receiving buffer to [Hard Disk
Spool] or [Memory Spool].

Fuji Xerox DocuCentre-IV C3373 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV C3373
Category	All in One Printer
Language	English