15 Problem Solving
602
Problem Solving
15
7 With holding the tabs, return the cartridge to
the original position, and then gently push the
cartridge in until it clicks into place.
8 Repeat steps 3 to 7 for the cartridge at the back of the unit.
9 Return the unit to the original position.
10 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine remains
paused.
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
To Next Page
Loading...
Need help?
General
