Fuji Xerox DocuCentre-IV C3373 Administration Guide

16 Appendix
654
Appendix
16
Symbol set 208 [0] (Default) : Roman 8
[1] : ISO 8859-1 Latin 1
[2] : ISO 8859-2 Latin 2
[3] : ISO 8859-9 Latin 5
[4] : ISO 8859-10 Latin
6
[5] : PC-8
[6] : PC-8 DN
[7] : PC-775
[8] : PC-850
[9] : PC-852
[10] : PC-1004 (OS/2)
[11] : PC Turkish
[12] : Windows 3.1 Latin
1
[13] : Windows 3.1 Latin
2
[14] : Windows 3.1 Latin
5
[15] : DeskTop
[16] : PS Text
[17] : MC Text
[18] : Microsoft
Publishing
[19] : Math 8
[20] : PS Math
[21] : Pi Font
[22] : Legal
[23] : ISO 4 United
Kingdom
[24] : ISO 6 ASCII
[25] : ISO 11
Swedish:names
[26] : ISO 15 Italian
[27] : ISO 17 Spanish
[28] : ISO 21 German
[29] : ISO 60 Norwegian
v1
[30] : ISO 69 French
[31] : Windows 3.0 Latin
1
[32] : Windows Baltic
[33] : Symbol
[34] : Wingdings
[35] : UCS-2
Font size 209 Specifies the point size of a font in 25 increments. The value of 100 represents
1 point.
[400] - [5000] (Default: [1200]) : 4.00 to 50.00 point
Font pitch 210 Specifies the pitch size of a font. The value of 100 represents the pitch size of
1 point.
[600] - [2400] (Default: [1000]) : 6.00 to 24.00 point
Form line 211 Specifies the number of lines on a page.
[5] - [128] (Default: [64]) : 6.00 to 24.00 point
Print sets 212 Sets the number of copies to be printed.
[1] - [999] (Default: [1]) : 1 to 999 sets
Important • When the output quantity is specified by a client, that number of copies is
printed. After printing, the number set on the control panel is overwritten
with the number newly specified. However, the number of copies specified
from the NetWare or lpd port will not overwrite the number set on the
control panel.
Image enhance 213 Sets whether or not to enable the Image Enhancement feature.
Image Enhancement smoothens the border between black and white,
reducing rough edges, and thus seemingly increasing the resolution.
[0] : Off
[1] (Default) : On
HexDump 214 Sets whether to enable a hex dump.
0 (Default) : Off
1: On
Draft mode 215 When printing in black and white, prints the portion printed in black by using
the draft mode. This feature is enabled for the entire document.
0 (Default) : Off
1: On
Color mode 216 Sets the color mode.
0 (Default) : Auto
1: Color
2: Mono
Parameter Item No. Value

Fuji Xerox DocuCentre-IV C3373 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Hard Disk Drive	160 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Speed	Up to 33 ppm (color/black)