16 Appendix
680
Appendix
16
îš„ PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript driver.
With the Pages per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages up, and with
or without frame borders.
îš„ Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB and
the job includes application data with graphic data (EPS file including binary data) pasted,
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] > [Connectivity
& Network Setup] > [Port Settings] > [USB] to properly print data which includes EPS files
with binary data.
îš„ ContentsBridge
With ContentsBridge, you can print PDF, TIFF, JPEG, and XPS (XML Paper Specification) data
by drag and drop. To print DocuWorks documents, however, DocuWorks Viewer Light (free
distribution) or DocuWorks 6.0 or later (purchase separately) is required. PDF and TIFF print
data will be transferred to the machine directly, whereas DocuWorks document data will be
first processed by the client computer, and then transferred to the machine and printed.
îš„ Text and Photos for Media Print
You can use a commercially available single-slot memory card reader, but the operation is
not guaranteed.
When you use a multi-slot memory card reader, only one of those slots can be recognized.
The slot to be used differs depending on the card readers. Some of the media and slots of
memory card readers may not be used on the machine, and the operation is not guaranteed.
îš„ Thumbnail for Media Print
The Media Print - Photos feature supports Thumbnail view but not Preview. The Media Print
- Text feature supports neither Thumbnail view nor Preview.
îš„ Gigabit Ethernet Board Kit (Optional)
Installing Gigabit Ethernet Board achieves high-network communication speed, but it does
not shorten the entire printing time.
îš„ Print Jobs while the Control Panel is being Operated
The processing and output speeds of print jobs may slow in the following conditions:
z
The control panel is being operated while the machine processes a print job.
z
The status of a print job is being viewed in the [Job Status] screen.
îš„ When Printing from the Bypass Tray
When you load A5 in Tray 5 and specify 2 sided printing, all data is printed on one side.
îš„ When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job including
that page is terminated).
To Next Page
Loading...
Need help?
General
