5 Tools
208
Tools
5
Note • Even when IP addresses can be resolved automatically using [DHCP] or [DHCP v6], port number,
login user name, login password, and server type cannot be resolved automatically. Configure these
items manually.
• When you select [DHCP] to automatically obtain the IP address, select [DHCP] or [DHCP/Autonet]
for [IPv4 - IP Address Resolution] of the TCP/IP settings of the machine.
• If an IP address is resolved automatically, the same IP address is assigned to both a proxy server and
a registrar server. If you use different IP addresses for the proxy server and the registrar server,
configure the IP addresses manually.
If multiple IP addresses are resolved automatically, assign the first IP address to a primary proxy/
registrar server and the second to a secondary proxy/registrar server. The third and subsequent
addresses are not used.
• Even when the IP address is resolved automatically, the port number, login user name, login
password, and server type cannot be automatically obtained. Set these manually.
îš„ DHCP
The SIP proxy server IP address and the SIP registrar server IP address will be automatically
retrieved from DHCP.
îš„ DHCP v6
The IPv6 address for the SIP proxy server and the IPv6 address for the SIP registrar server
will be automatically retrieved from the DHCPv6 server.
îš„ STATIC
Allows you to manually enter the IP addresses for the SIP proxy server and the SIP registrar
server.
SIP Proxy Server Setup
Configure SIP proxy server settings. You can set a primary server and a secondary server.
Note • You can use up to two SIP proxy servers.
• Select [Cisco] for a server type.
îš„ Primary Server - IP Address
Enter the IP address of the primary server. Up to 255 characters are allowed. You can specify
the addresses by IPv4 address, IPv6 address, and FQDN.
îš„ Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 5060.
îš„ Primary Server - Login User Name
Enter the login user name of the primary server. Up to 31 characters are allowed.
îš„ Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.
îš„ Primary Server Type
Select the type of primary server from [Standard] or [Cisco].
îš„ Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
îš„ Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
To Next Page
Loading...
Need help?
General
