7 Printer Environment Settings
318
Printer Environment Settings
7
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer by
connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note • The print drivers are contained in the Driver CD Kit. For information on the driver installation
procedures, refer to the manual contained in the Driver CD Kit.
• You can download the latest print driver from our web site.
Using the Machine as a Local Printer
îš„ USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When Using USB Port"
(P.321).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to connect
the machine.
îš„ LPD
Use LPD when direct communication between the machine and a computer via TCP/IP is
available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/IP (LPD/Port 9100)"
(P.323).
Via Internet
IPP
Network connection
NetWare / Windows shared printer
LPD/SMB/Port9100/EtherTalk
Network connection
Local connection
USB
Server
To Next Page
Loading...
Need help?
General
